Your Windows License Will Expire Soon – Step by Step Fix Guide

Hello everyone. In this guide, we will be discussing Windows 10’s expiration. Before we start talking about it, I would like to explain that Windows 10 isn’t as “free” as most people think. It’s just like any product, it has an expiration date and you can always buy a license or a product key to keep using it. Note that:

  • Upgrading to Windows 10 from Windows 7, 8, or 8.1 will give you a free Windows License for 1 year.
  • Installing Windows 10 without a Windows License will give you free access to Windows 10 for 30 days.
  • You also are probably eligible for a free upgrade to Windows 11 from Windows 10.

Now, when this message shows up, it’s either because your Windows License is really expired or it’s a problem that needs to be fixed. If you’re not sure if your copy is supposed to be valid or not, I would recommend that you contact Microsoft’s Support Center.

Your Windows will expire soon windows 10 issue how to fix it

But if you’re sure it’s a mistake, then it’s time to fix it. Follow the following steps one by one to get through it.

How to Fix Your Windows License will expire soon in Windows 10 Step by Step:

Step 1: Just restart your computer

Before performing any fixes, it’s always better to make sure it’s not just a one-time issue. So, if you are facing this error for the first time, it’s good to give your computer a couple of restarts and see if the problem vanishes.

Step 1: Restart your computer

If you still encounter it after rebooting your computer, then it’s serious and you need to take some action and that’s what we’re offering in the next steps.

Step 2: Uninstall and delete your Windows License product key

First of all, we are going to reset the licensing status of the machine and reboot the computer. If restarting won’t work we will take the slightly more drastic measure of uninstalling your Windows 10 product key and deleting it from your registry. That will allow us to reinstall it later from scratch which will solve the problem in most cases.

Note that right after deleting your product key, your computer may slow down or even freeze.

You will then need to be patient and let your computer take its time and you will then be able to accomplish the task. But we’ll cross that bridge when we get there.

One final thought… Make sure you have a copy of your product key before uninstalling it.

It should be in an email from whoever sold or distributed Windows to you, or on the box, the Windows DVD or USB came in. Shortly, in Step 3, we’re going to reinstall it.

Ready to go? Follow me:

  1. Type “cmd” in your start menu, right-click on Command Prompt and choose Run as administrator.Step 2: Uninstall and delete your product key
  2. Click Yes to give it permission.Step 2: breakdown of actions
  3. Type slmgr -rearm and hit Enter. (This resets the evaluation period/licensing status and activation state of the machine.)Step 2: next you Type slmgr -rearm and hit Enter.
  4. Click Ok and restart your computer and see if the problem is fixed. If it’s not, keep following the steps.Step 2: Click Ok and restart your computer and see if the problem is fixed. If it's not, keep following the steps.
  5. If resetting the licensing status didn’t work, go back to CMD (Admin) and type the following command, and hit Enter: slmgr /upk (Command to uninstall product key and return license status back to trial state.)
  6. A message saying “Uninstalled product key successfully”, click Ok to take the next steps.
  7. Still, on the Command Prompt windows, type this command and then hit Enter: slmgr /cpky (Command to clear product key from the registry)
  8. Now that we have cleared the product key from Registry, there must be no trace of it on your computer. Click Ok and Reboot your computer.

Now that you have fully deleted your License, continue to Step III to re-insert the product key.

Step 3: Use the Troubleshooter to detect and fix any issues

During this process, the troubleshooter will check any activation issue and try to fix it. It may also succeed in reactivating the product key. If not, we’ll insert the key manually. Check the steps below:

  1. After rebooting your computer from the last step, head into Settings at your start menu.Step 3: Use the Troubleshooter to detect and fix any issues
  2. Click on the Update & Security icon.
  3. Now from the left pane, select Activation and click on Troubleshoot at the bottom of the screen to launch the troubleshooter.
  4. Wait for a little while until it detects activation problems.
  5. If the troubleshooter could fix it right away and activate your Windows 10 automatically then you’re good.

If the troubleshooter didn’t succeed to activate your computer, then it’s time to re-activate it manually: this is what Step 4 is for.

Step 4: Enter your Windows License product key manually

Get your product key from the email or box we mentioned before and let’s enter it.

  1. ِClick on Change Product Key next to the key icon to re-enter your Product key.Step 4: Enter your product key manually
  2. Enter your product key in the white rectangle and then click Next to reactivate it.
  3. Now it’s time to restart your computer and see if the expiration message is gone.

If you encounter any problems using this way, or if the message isn’t gone, go on and follow the next step.

Step 5: Disable two services

We will try to disable these two Windows services and see if they are the reason for the issue:

I really wouldn’t recommend that you disable Windows updates for more than a month because of the important security updates that Microsoft releases from time to time. So we will do it now and see if it solves your problem, but in about a month, re-enable Windows Updates and see if any major update is available. You can put this on your calendar.

  • Type “run” in your start menu and choose Run or press Windows key + R to launch it.
  • Type services.msc and then click OK.
  • In the services list, look for Windows License Manager Service and double click on it.
  • In the general tab, hit the Stop button if active to stop the service while changing its properties.
  • Change the Startup type to Disabled and then click Ok.
  • Now look for Windows Update and double click on it.
  • In the general tab, hit the Stop button if active to stop the service so you could change its properties.
  • Change the Startup type to Disabled and then click Ok.
  • Restart your computer for the changes to take effect.

If the problem persists, then maybe you have a problem with your date and time settings. Step VI will help you fix it if it’s the case.

Step 6: Check your date and time settings

A license or product key has a production and an expiration date, just like food or medication. That’s why if your date / time settings are messed up, this might cause the issue you’re facing. That’s why I advise you to take a look at it and fix whatever needs fixing. Here’s where you check and control it:

  • Right-click on your clock at the bottom-right corner and choose Adjust date/time.
  • Turn on both Set time automatically and Set time zone automatically. These two will get you the best date/time and region settings.
  • If you need more control, then select the Additional date, time, & regional settings.
  • This will bring up the traditional control panel page where you can adjust your date, time, and finally your region.
  • Now reboot your computer and see if the activation message is gone. Still there? It’s okay, Step VII will help you out.

Step 7: Restore your computer to a previous point

If none of the previous steps helped you out, then you might need to perform a system restore. This will bring back your computer to a previous state, before any errors happened that caused the expiration / activation problem.

  • Open Control Panel and search for recovery.
  • Open System Restore.
  • Click Next.
  • Choose a previous restore point from a date before you started seeing the “your windows will expire soon” message, and click Next.
  • Click Finish.
  • After restarting your computer, check if you’re still getting the “expired” message.

Last hope: Reset Windows 10

Yeah, no one likes doing this, but if all the previous ways failed you, you have to reset your Windows 10 to reach the root of the issue.

The good part is that resetting Windows 10 is a better alternative than a clean Windows 10 installation because you have the option to keep your files. But I always recommend that you backup your data on an external storage drive just in case.

This one should be your last choice if all the above methods failed, and I do believe it will fix the problem. Here’s how to do it:

  • Open your Settings from the Start menu.
  • Click on Update & Security.
  •  Choose Recovery from the left pane and click on the Get started button under the Reset PC section.
  • Now you are totally free to make your choice but it’s worth giving the Keep my files option a shot.
  • Review the programs that will be lost and make sure you can recover them back yourself after the reset and then click Next.
  • One step close to Reset. Just HIT IT! You can do it!

After resetting, you’re less likely to face the license problem again, but if it shows up, just use the troubleshooter and re-enter the activation Key, as in Step III. This will be enough to fix it.

Video Guide

Here’s another way to do it in video format:

Suggested Read: USB Device Not Recognized

Frequently Asked Questions

How do I get rid of that annoying Windows activation notification?

Open Regedit by using the run command or by searching for it in either the start menu or file explorer. Next, type the following command:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion \SoftwareProtectionPlatform\Activation

After this, in the right pane of the registry editor, you will find the REG_DWORD value ‘Manual’. Right-click on it and select Modify. In the Value Data window which appears, change the DWORD value to 1.

How do I extend my Windows 10 License?

1 – If the device is new and Windows 10 was pre-installed by the manufacturer then the license is permanent. The license key for the edition installed by the manufacturer is embedded in the bios and using the following command in a Command Prompt (Admin) or PowerShell (Admin) will display the key (without the quotation marks, obviously):

“wmic path SoftwareLicensingService get OA3xOriginalProductKey” and press Enter.

2 – You can use the key to try and activate correctly by going to Settings > Update and security, then select Activation then Change product key.

3 – Enter the key displayed in the command window.

What happens if you don’t have a Windows License to Activate Windows?

Not much, as weird as that might seem. You’ll get a constant overlay in the down-right corner of your screen informing you that this version of Windows is not activated. That’s the most noticeable and, quite frankly, annoying thing. Other than that, you will not be able to change the wallpaper, accent colors, themes, lock screen, and so on. Anything related to Personalization will be grayed out or not accessible. Additionally, some other apps and features might also get locked out, but nothing major. The overall system functionality will stay the same.

Is KMS activation safe?

Technically it is safe as long as you get it from the official source. However, do note that this is an illegal activation tool, so tread carefully. We don’t recommend doing so because of the juridical implications.

Have you found this article helpful? Do you have an easier way how to solve this problem? Share your thoughts in the comments below!

You might also encounter similar problems like Auto Login Windows 10 and Can’t Install iTunes On Windows 10, our website is more than happy to help you!


  1. I have W10 that is preinstalled in my laptop. However, I have read some articles about volume licensing and found out that my laptop is, indeed, one. If I do the reinstallation of the product key, will it prolong my usage of Windows 10?

  2. Hello, please i am having the same problem on my computer and have tried with cmd to get my product key but…its not giving me anything when i type in the command in cmd.
    wmic path SoftwareLicensingService get OA3xOriginalProductKey
    please i need your help
    thank you

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.